CE 705 Activated Sludge Process

The activated sludge process is the most important biological process in water treatment. CE 705 enables this process to be demonstrated.

A pump delivers raw water contaminated with dissolved organic substances (organic matter) into the aeration tank. Aerobic microorganisms (activated sludge) in the aeration tank use the organic matter as a source of nutrition, biodegrading it in the process. Since aerobic microorganisms need oxygen, the raw water is aerated in the aeration tank. The activated sludge is mixed with the raw water by stirring machines. In the secondary clarifier the activated sludge is then separated from the treated water by sedimentation. A portion of the activated sludge is returned to the aeration tank (return sludge). The treated water is collected in a tank.

It is also possible to convert ammonium into nitrate (nitrification) and nitrate into nitrogen (denitrification). For denitrification a zone without aeration can be created in the aeration tank by installing a partition wall.

The following flow rates are adjustable: raw water, return sludge, internal recirculation for pre-denitrification and air. Oxygen concentration, pH value and temperature can be contolled.

A software program is provided to display the operation states and measure data. A process schematic shows the current operating states of the individual components and the measured data.

Samples can be taken at all relevant points. Activated sludge from a wastewater treatment plant and analysis technology are required for the experiments. Recommended parameters are:
– BOD5 (biochemical oxygen demand)
– COD (chemical oxygen demand)
– NH4 (ammonium)
– NO3 (nitrate)

  • wastewater treatment plant in laboratory scale
  • aerobic biological degradation of organic substances
  • nitrification and pre-denitrification

Aeration tank

  • capacity nitrification zone: approx. 34L
  • capacity denitrification zone: approx. 17L

Tanks

  • secondary clarifier: 30L
  • raw water tank: 200L
  • treated water tank: 80L

Flow rates

  • raw water pump: max. 25L/h
  • return sludge pump: max. 25L/h
  • circulation pump: max. 25L/h

Speeds (stirring machines)

  • secondary clarifier: max. 45min-1
  • all others: each max. 600min-1

Measuring ranges

  • flow rate:
    • 2…25L/h (raw water)
    • 50…550L/h (compressed air)
  • temperature: 0…40°C
  • pH value: 0…14
  • oxygen concentration: 0…10mg/L

 

230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase

  1. biological wastewater treatment
  2. aeration tank with 3 stirring machines
  3. secondary clarifier
  4. nitrification and pre-denitrification
  5. separate supply unit with 2 stirring machines
  6. all relevant flow rates adjustable
  7. control of temperature, pH value and oxygen concentration
  8. measurement of flow rate, temperature, pH value and oxygen concentration
  9. GUNT software for data acquisition via USB under Windows 7, 8.1, 10
  10. GUNT software with display of the operation states
  11. visual inspection with webcam on PC
  • learning the fundamental principle of the activated sludge process
  • functional principle of nitrification and pre-denitrification
  • creation of a stable operating state
  • identification of the following influencing factors
    • return sludge ratio
    • return ratio of the internal recirculation
    • sludge age
    • sludge loading
    • volumetric loading
    • oxygen concentration, pH value and temperature
  • efficiency of the pre-denitrification

Web offer

This item is in your cart. Remove
Request for Quotation

Product number

CE 705

downloads

related projects