CT 300.05 Two-cylinder diesel engine for CT 300
In conjunction with the CT 300 test stand, which includes a drive and brake unit, the four-stroke diesel engine CT 300.05 is highly suitable for use in teaching the fundamentals of engine functioning and measurement.
The engine used here is a water-cooled two-cylinder four-stroke diesel engine with indirect injection. The engine is started, run in passive mode and slowed down by an electric motor mounted in the CT 300 unit. The brake unit is connected by way of a elastic claw coupling.
The engine is prepared for measurement of the cylinder pressure for indication, and additionally includes a sensor to measure the exhaust gas temperature. The sensor, ignition cut-off and fuel supply are connected to the CT 300 test stand.
The full load and partial load characteristic curves of the engine are plotted in experiments.
- engine for use in CT 300 test stand
Water-cooled two-cylinder diesel engine
- displacement: 570cm3
- bore: 70mm
- stroke: 74mm
- power output: approx. 10,2kW at 3600min-1
-
- water-cooled two-cylinder four-stroke diesel engine for installation in the CT 300 test stand
- engine mounted on base plate
- force transmission to brake via elastic claw coupling
- engine complete with fuel hose and exhaust gas temperature sensor
- fuel hose with self-sealing quick-release coupling
- plotting of torque and power curves
- determination of specific fuel consumption
- determination of volumetric efficiency and lambda (fuel-air ratio)
- energy balance
- determination of the frictional power of the engine (in passive mode)