RT 060 Training system: position control, HSI
This compact experimental unit offers every opportunity to learn the fundamentals of control engineering through experimentation on a linear position control system.
The experimental setup is mounted on a housing which accommodates all the electronics. A transparent protective cover permits safe observation of the experiments. A carriage can be moved by a DC motor via a toothed belt. The linear positioning is measured by a rotary encoder and delivered as a voltage signal. The output signal from the sensor is sent to the software controller. The output signal from the controller influences the motor current. The motor is automatically shut down if the carriage reaches one of the two end positions.
The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the experimental unit and the PC is made via a USB port.
- experimental unit with clear linear position control system
- extensive range of experiments on fundamentals of control engineering
- state-of-the-art software for all experimental units of the RT 010 – RT 060 series, with extensive controller and recorder functions
- software-based simulation of the controlled system
DC motor
- transmission ratio: i=50
- speed: 85min-1
- torque: 200Nmm
Travel: max. 300mm
Max. traverse rate: 45mm/s
Scale: 0…300mm
Software controller configurable as P, PI, PID
Software
- process schematic with controller type selection (manual, continuous controller, programmer)
- time functions
- simulation function
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
UL/CSA optional
- experimental unit for control engineering experiments
- linear position control of carriage with linear drive and gear motor
- rotary encoder as displacement sensor
- transparent protective cover
- 2 microswitches to shut down at end positions
- software-based controlled system simulation
- process schematic on front panel
- networkable GUNT software
- GUNT software with control functions and data acquisition via USBunder Windows 7, 8.1, 10
- fundamentals of control engineering based on the example of a linear position control system with integral control action
- open loop control response
- effects of different controller parameters and methods on the response of the closed loop system
- recording of step responses
- reference variable
- controller optimisation
- software-based controlled system simulation
- comparison of different controlled system parameters