PT 500.05 Brake & load unit
Many vibration phenomena can only be achieved when the system is under load. The brake and load unit is used to generate vibration as a function of torque, e.g. in toothed gearing mechanisms or electric motors.
It consists of a magnetic particle brake and an electric display and control unit. The braking torque can be finely adjusted on the display and control unit. The exciter current is applied as a measure of the braking torque and is indicated digitally on a display.
An integrated belt drive, with a free shaft, provides the brake with two torque and speed ranges. The energy is converted by the brake into heat and discharged to the ambient air by a fan.
The brake can be quickly and precisely mounted on the slotted plate of the PT 500 base unit.
PT 500.05 is used with the following kits:
PT 500.13 Couplings
PT 500.14 Belt drive
PT 500.15 Damage to gears
PT 500.19 Electromechanical vibrations
- generation of a loading torque
- two speed and torque ranges
- vented magnetic particle brake with display and control unit
Continuous braking power: approx. 450W/3000min-1
Transmission ratio between brake shafts: i=3
Direct brake operation
- speed range: 200…2000min-1
- braking torque: 1…10Nm
Operation via belt drive
- speed range: 600…6000min-1
- braking torque: 0,3…3,3Nm
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional
- brake and load unit for the machinery diagnostic training system
- magnetic particle brake
- display and control unit with exciter current display
- potentiometer to adjust braking torque
- integrated belt drive for second speed and torque range
- temperature protection and fan overheating protection
- stackable storage system to house the components